Instructions

MIXING DIRECTIONS:

  • SHAKE concentrate WELL before measuring.
  • Add purified water to your application sprayer. 
  • Clear the lines of your sprayer.
  • Add 2 tbs. (1oz) of concentrate per 1 gallon of water.
  • Shake/agitate mixed contents of sprayer before applying to plants.
  • Agitate as needed during use, approximately every 5 minutes.

ATTENTION:

  • DO NOT SPRAY WHEN TEMPERATURE IS ABOVE 80° F.    
  • DO NOT STORE PRODUCT IN DIRECT SUNLIGHT.
  • CLOSE CAP OF CONCENTRATE TIGHTLY WHEN NOT IN USE. 

HOW TO APPLY:

1) Saturate entire plant, especially underside of leaves and stem of the plant.

2) Repeat as needed.

Lost Coast Plant Protector must be applied liberally to cover all area of plant surface.

  • OUTDOOR: Use early morning before heat of day, or dusk. Best if air temperature is 80 degrees Fahrenheit or less.
  • INDOOR: Apply while main lights are off. Allow plants to dry thoroughly before lights go back on.
  • CLONES & SEEDLINGS: Safe to spray on clones and new starts. We highly recommend dipping while they are in cubes and when they have roots showing. When dipping be sure to agitate mixture every few minutes.
  • SOIL DRENCH: Make sure soil or grow media is already watered before adding Lost Coast Plant Protector. Apply 1 oz. per gallon through soil or grow medium as needed.
    •  Always test on a single plant first. Some plants are more sensitive than others when used as a soil drench. 
  • MAY BE USED UNTIL THE DAY OF HARVEST: Ideally preventative maintenance in pre-flower stages is best, so you can go without use of our product in flower stages. If required up to or at day of harvest, use as needed.
    • WEEKLY MAINTENANCE: Apply 1 oz. per gallon once a week as needed for best results.
    • BOOSTING STRENGTH: Most people get great results from repeat applications. However occasionally some people get better results from boosting the strength by using 2 oz per gallon instead of 1 oz per gallon.  

      REPEAT AS NEEDED:

      Follow directions for use on the label. Test for yourself to observe your plant variety reaction. Some plants are more sensitive than others.

      •  For most issues it will take more than one application for our product to be effective.

      • Making sure plants are entirely saturated is the most powerful way to use Lost Coast Plant Protector.    

       

      USE OUR PRODUCT AS A STAND ALONE:

      DOES NOT NEED A WETTING AGENT. 

      DOES NOT NEED pH ADJUSTMENT.

      Our product works best if used by itself.

      We recommend ALWAYS test on one plant first when using for the first time:

      • Especially when combining with a nutrient product such as kelp foliar spray, for example.

      • Especially when considering mixing use of Lost Coast Plant Protector with other products. We cannot guarantee efficacy or results when used with other product.

      • To discover how long to wait between application of other products.

      Use it correctly, following all directions on the label, and as often as needed, and you will find out how well it can work for you.

       

        APPLICATION EQUIPMENT:

        ALWAYS PURGE YOUR LINES BEFORE USE OF YOUR SPRAYERS.

        SMALL GARDENS: Use a half gallon or one gallon Hudson style sprayer for best results. 

        LARGE GARDENS: For larger applications like green houses and outdoor, we recommend a power Hudson style sprayer to apply ample amount of product to all plant surfaces, for best results. 

        When using a Hudson style sprayer, you will have to shake/agitate often (approximately every 5 minutes.)

        ACREAGE:  2.5 gallons of concentrate mix with water to make 320 gallons (330 gallon tote), and covers 1 acre. Frequent or continuous agitation required.

         

        COMMON SENSE CAUTION

        • Minimal protective gear needed - eye wear, light weight mask and gloves.
        • Keep out of eyes, mouth and nose. If you get concentrate or diluted product in the eyes, rinse with cool water for fifteen minutes. 
        • Keep out of reach of children.